Turn to Outlaw crack chaser blades to ream out cracks in concrete, stone, brick, and asphalt.  Used to enlarge fissures prior to apply adhesive or banding materials, this blade provides long life and with it's canted edge, the ability to work to maximum depth     

 Tuck point blades are mortar removal machines.  Designed to work through tough joints between brick, stone, or CMU, these blades cut down the time needed for joint repair.  Can be used wet or dry                                                                                                                                                                                                            

Sandwich double tuck point blades provide smooth and fast mortar removal when working on long joint runs between CMU or brick.   1/4" thick for maximum material removal.  Can be used wet or dry                    

Outlaw arrow grinding cups are perfect for removal of thin vinyl glue, carpet glues, light coatings and mortars.  These cups can also be used for aggressive grinding on bare concrete.  They can prep concrete and remove coatings all in one step.  With a sharp leading edge the arrow segments pierce coatings and pull them from concrete                                                       

Outlaw Tornado grinding cups feature a flat center area that allows for the placement of more extended segments.  Extended segments reduce surface gouging as they move across the substraight.  These cups allow more aggressive grinding while leaving less ring marks.                                                                                                                                                                              

Outlaw T segments cup wheels remove coatings and for smoothing out high spots.  This style of cup removes coatings along with the top laitance layer layer of concrete leaving an exposed absorbent surface.  This surface will help create a strong lasting bond with any coating applied afterwards.  The T shaped segments hang over the egde of the wheel specifically to prep edges up to walls

Turbo grinding cups are designed for grinding and shaping of hard materials such as concrete, natural stone, and granite.  Made for aggressive material removal and shaping of surfaces before smoothing with polishing pads of application of resin or coatings                   

PCD grinding cups are used specifically for the removal of thick epoxy coatings.  These wheels are designed using polycrystalined diamond.  This abrasive material allows the PCB cup to be more aggressive and longer lasting than conventional grinding wheels when removing hardened epoxy    

Double row grinding wheels offer more stability and a smoother finish when removing the surface layers of concrete or natural stone.  Two rows of grinding segments increases the abrasive surface area allowing these wheels to have a longer life